Tipps & Tricks

Initially, any holes or cracks should be filled and the surface treated so that it is smooth, clean ,dry, firm, and stable.

Please apply the adhesive by rolling it onto the wall. The next step is to cut off the TEXTILES GLASGEWEBE in the required lengths. Add + 10 cm to the height of the wall. You then start hanging the TEXTILES GLASGEWEBE at the ceiling and press it down into the still moist adhesive layer. Do make sure that the first length hangs absolutely vertically. If desired, - it can also be fixed straight from the roll. Hang the TEXTILES GLASGEWEBE with a butt joint and apply it with the horizontal pattern matching threads, thread - to thread. Press well onto the surface with a plastic or steel spatula. Trim neatly at the ceiling and floor with a sharp knife.
Roll the paint on only after the TEXTILES GLASGEWEBE has dried. If possible do apply two applications which give that wall a decorative and hard wearing finish. A sheepskin roller is recommended and one with a longish handle would facilitate the application.